Industries with products manufacturing service as well as other services are the first preference. Pipe industry is one among those diversified companies which do their work on priority and with skill based technology. Among these comes Paint Coating System which is a skill based technology service.
There are many types of this service and some of the prominent ones include PROTECTO 401. This is a kind of coating which is usually seen on iron pipes and fittings. Big pipes like sewer pipes, drainage system pipes, etc. use this kind of coating layer. Another one among this list is interior lining paint which includes resin coating service and has to be maintained with proper temperature along with exact compositions of elements required. Specialty paint comes into play when it is asked for and includes 4 to 6 consecutive layers of paint. Close to this falls specialty tape coating which is simple 2 or more layer coating system involving cold tapes and high resistant thinner foils. Coating not only improves the quality of the pipe but also enhances it to provide a better look overall. Refurbishing is the term used for this kind of coating services which include blasting, rearing, and bonding of pipe to give it an even shape. High voltage electrical supply pipes need to be coated with fire resistant as well as power resistant coating. For pipes of this kind, cables of different versions are used. This minimizes corrosion effect on these pipes and provides a safe mode to work upon.
Various guidelines have to be followed whenever Paint Coating System is in concern. These guidelines are based upon defects which arise after coating system is done. These defects include flaking which means coating on pipes or other objects are lifted by heat and other factors. Flakes of paint can be seen in this kind of damage which proves that the guidelines have not been followed properly. Guidelines include analyzing the product on which coating is to be done. Depending upon factors like resistance, power, combustibility, etc. these guidelines provide right steps to be carried away. Paint application is a step that comes at the end of all steps which is very well defined in guidelines. Suppose you want to coat a pipe that contains electrical wiring. Now there are two types of wires that can be used in that pipe, protected covering wire or non-covered wire. Coating system depends upon this kind of wire usage as it will determine how much resistance pipe has to bear containing it. If protective layered wires are used then you can apply level 1 Pritec coating which is especially a dual layered system made for electrical purposes. At the same time, if unprotected wires are used then pipe coating has to be of a type which can sustain high resistance along with providing safe solutions.
By following these guidelines and steps you can get the best layered coating systems. It does not require any guessing work and you cannot merely choose any coating depending upon your choice. This is the sole reason why guidelines need to be followed and complied with coating system.
For more information on Coating System visit Corrosion Resistant Coating
Leave a Reply